This is a custom built heavy duty utility trailer. The main frame is fabricated out of 3/16" thick 3" heavy duty "C" channel and the cross members are 1/8" thick 2"x 2" angle iron. This trailer is stout enough for anything that will fit on it. The bed area is 4' W x 8' L. The total length is 13' L x 70" W. It has a new treated floor made from boards 1" thick. Brand new LED tail lights. New wiring which is run through conduit so it is protected from damage. I ran an extra ground wire to each and every light to eliminate grounding problems. New 5' ramps that store away in a lockable carriage under neath the rear of the trailer. Custom 14" Ford chrome rims including the spare which also fits under trailer and is lockable. It also has a tail gate to hold in loads and chains that hook to tailgate to hold level but are removable to allow gate to swing completely down out of the way so ramps may be used. Rails and tailgate are 14" H. It has a 5' tongue with floor for items to be hauled on tongue with 4 "D" rings for tie down points. A 40" L x 11" W x 11" D tool box mounted at the front. New Paint. New wheel bearings and grease. Trailer has a heavy duty tongue that requires a 2 5/16" ball. With this trailer there will never be a problem of having some place to hook tie downs. Complete with safety chains and uses a 4 prong flat plug.