The Kiefer Kattleman is a rugged heavy duty stock trailer for cattleman looking for a trailer that will stand up to the abuse. Thick tubing, a heavy frame and .190 thick sheets, 4×4 rear superstructure, thick 3" I-beam crossmembers under Shelby’s resistol floor over torsion axles, SS cam bars and slam latches on the rear and aluminum slam latch centergate. The best and heaviest material makes the best and heaviest trailers. With cleated rubber floor, swing/slide cut gates, LED dome lights, loading lights, and full escape door. Trailer Standards Aluminum roof with heavy duty roof cover Composite flooring “Brush” type .190 bent fenders full length Steel subframe for Gooseneck Steel subframe for Gooseneck 2-5/16" coupler GN: Calfgate in Gooseneck (no calf gate in Combo type) Center Divider Gate with slam latch Escape door – driver’s side Rear gate full-swing: 1/2 slide with 2" rubber rollers and nylon pads with cam bar and/or slam (5 hinges on rear door) Square tube rear frame 4"x4" Side uprights tubular aluminum High airflow standard configuration All LED DOT approved lighting (all exterior marker, turn and stop) Upper and lower turn signals in rear frame Rubber bumper 3" crossmembers Axles attached to heavy duty frame rail 3/8" thick Torsion axles: (2) 7,000lb 8-bolt (12'-24') upgrades available Torsion axles: (3) 7,000lb 8-bolt (26'-40') upgrades available Tires: ST235/16 Load range E All wheel electric brakes 12,000lb single speed drop leg jack GN (jack handle doubles as a lug wrench), top wind jack PT Break away battery and switch with charge unit